85
Viewing or Editing Entries
1. Press .
2. Press .
3. Press or to
highlight
View:
… and then press ING/ENTER.
4. Press or to
highlight
the
entry you want to edit and then
press ING/ENTER.
5. Press ING/ENTER again to
enter “Edit Mode”.
Type your changes. Use
or
to move the cursor; use
to
delete.
Use or to
move
between fields.
6. Press ING/ENTER to save your
changes.
Press
to exit without saving
any changes.
Deleting Entries
1. Press .
2. Press .
3. Press or to
highlight
Delete an Entry and then press
ING/ENTER.
4. Press or to
highlight
the
entry you want to delete and
then press ING/ENTER.
To delete all databank entries, at
the Databank Menu, highlight
Erase the List and then press
ING/ENTER. Press Y to erase the
list or N to cancel the deletion.
Using a Password
You can use a password to prevent
unauthorized access to the
databank. Warning! Always write
the password in a safe, separate
location. If you lose or forget the
password, you will be able to use
the databank again only by restoring
the factory defaults of your BSI-
1900, which will permanently erase
all the information stored in the
databank.
1. Press .
2. Press .
3. Press or to
highlight
Set
Password and then press
ING/ENTER.
4. Type a password of four to 15
characters and press
ING/ENTER.
Use
to move the cursor; use
to delete.
5. Re-type the password to
confirm it.
The password you set will be
requested the first time that the
databank is used during a
session.
6. To change the password, repeat
steps 1-5.
To remove a password, press
ING/ENTER at an empty Set
Password screen.
Using the Databank
Using the Databank
