6
INSTRUCTIONS FOR ASSEMBLY
6
6.
Tighten the nut to the torque shown in table 1.0.
7.
Only on the first impeller, place the graphite disc on all
models with the exception of 360SSI in the SSI 6" Series
and models of the 10" SSI Series.
8.
Slide diffuser over the impeller and upthrust washer until it
is seated completely down on the motor bracket.
9.
Repeat the steps to place the next diffusers, inserting
the impellers (A) first, and then adjusting as indicated
using a torque wrench and the torque chart indicated
for each pump (B).
When sliding the different diffusers to cover the
impeller (C) and thereafter, we recommend checking
your alignment with respect to the welding point in
the diffusers for a better final appearance (D).
Do this until you reach the discharge assembly.
7
Flare Nut
Flared Spacer
Impeller
8
A
B
D
C
