Franklin Electric FPS SSI Series, Assembly Manual

Page: 14 / 16

12
INSTRUCTIONS FOR ASSEMBLY
TABLE 1.0
Collet Nut Torque Values
Pump GPM Torque (Nm)
85 25
150 50
225 50
300 50
360 50
425 60
475 60
550 180
625 180
825 180
1150 300
TABLE 2.0
Metal Strap Torque Values
Pump GPM Torque (Nm)
85 45
150 45
225 45
300 45
360 45
425 80
475 80
550 120
625 120
825 120
1150 120
TABLE 3.0
NEMA Shaft Dimension (in)
NEMA Min Max
6” 2.8 3.0
8” 3.9 4.1
10” 3.9 4.1
36.
Fill out nameplate data.
37.
For 6” pumps, install the nameplate by inserting
drive rivets (supplied) into the two pre-drilled holes
located on the motor bracket.
38.
For 8” and 10” pumps, attach nameplate to the
suction screen with two #6 machine screws and lock
nuts (supplied). Nuts will be on the inside of the
screen to eliminate possible interference with or
catching on the casing during installation.
37
38