FRÄNKISCHE profi-air 250/360 flex, Installation And Operating Instructions Manual

Page: 66 / 108

Installation and operating instructions profi-air 250/360 flex
66
Setpoint Factory setting
Setting range
Control panel
Optional
wireless
remote control
profi-air
cockpit
profi-air
cockpit pro
software
Ventilation mode 0 OFF – – – –
Ventilation mode 1 49 % of mode 3 – – – 0–100 %
Ventilation mode 2 70 % of mode 3 – – – 0–100 %
Ventilation mode 3 (250 flex) 2,100 rpm
Can be set from
1,200–3,050 rpm –
–
Can be set from
1,200–3,050 rpm
Ventilation mode 3 (360 flex) 2,400 rpm
Can be set from
1,600–3,200 rpm –
–
Can be set from
1,600–3,200 rpm
Ventilation mode 4 130 % of mode 3 – – – 100–200 %
Weekly programme P1 ON / OFF OFF / P1 – P11 OFF / P1 – P11 OFF / P1 – P11
Settings weekly programme P11 Mode 3, permanent – – – Mode 0 to 4
or automatic
Automatic summer bypass
Extract air temperature
Fresh air temperature
Tmax – 24 °C
Tmin – 15 °C
– OFF / 21–30 °C
12–17 °C
– OFF / 21–30 °C
12–17 °C
Duration of manual bypass 1 h – – – 1–8 h
Filter lifespan 6 months – 90–360 days 30–360 days 1–12 months
Defroster heater OFF – ON / OFF – ON / OFF
Extract air humidity sensor 45 % – 35–65 % – 35–65 %
VOC extract air sensor Low sensitivity – – –
Low / medium / high
sensitivity
Digital input 1
Ventilation mode 2
constant
– – –
Ventilation mode
0 / 1 / 2 / 3 / 4
constant
Digital input 2
Ventilation mode 4
constant
– – –
Safety-relevant
switch-off
High
water level
Safety-relevant
switch-off without
alarm
Fume hood 1
Fume hood 1
5 Factory settings and setting ranges of control units
The following section describes the different factory settings of the ventilation unit and the setting options at the control panel,
wireless remote control, profi-air cockpit app and profi-air cockpit pro software.
The fan performance must be set by authorised and qualified personnel only in order to ensure sufficient
ventilation of the rooms as well as balanced ventilation operation.