FRÄNKISCHE profi-air 250/360 flex, Installation And Operating Instructions Manual

Page: 24 / 108

Installation and operating instructions profi-air 250/360 flex
24
3.9 Electric connection
The network connection is established using a pre-installed mains cable, and it is to be secured according to local electric
codes.
Electric connection activities are to be carried out by authorised and qualified personnel and in the
"dead" state of the device only. In addition, applicable local regulations and safety provisions must
be complied with.
3.10 Optional operating options
The profi-air flex ventilation unit can be controlled by means of the control panel incorporated into the front of the housing.
Optionally, you can also operate this unit using the profi-air cockpit app, the wireless remote control with display or an external
control panel. The following sections will describe how to connect the optional operating options to the unit.
3.10.1 profi-air cockpit app
You can download the profi-air cockpit app for free for iOS or Android devices from
the appropriate app stores. Install the app on your terminal device. A standard wire-
less router and an appropriate network cable (RJ-45) are required to connect the app
with the ventilation unit.
The profi-air cockpit app features the following functions / indications:
n
Selection of the operating mode (manual / weekly programme / auto)
n
Selection of the ventilation mode (0 / 1 / 2 / 3 / 4).
n
Selection of the bypass functions (manual / extract air operation only / auto)
n
Filter indication
n
Indication of temperatures
n
Indication of humidity / air quality (only if the respective sensors have been installed)
n
Error messages
n
Holiday mode
n
Night setback operation
n
Fireplace mode