BBR Operating Manual
Page 6
1 Uncrate the Unit
This unit will arrive crated in a skid-mounted carton.
Caution! The shipping container may have staples, nails, banding
under tension and possible wood splinters, which can cause
injuries. Wear gloves and eye protection to reduce the risk of
injury when uncrating.
§
Cut the plastic banding holding the cardboard carton to the
shipping pallet, using heavy scissors or tin snips. Use caution to
avoid contact with banding, when cut.
§
Lift the cardboard carton straight up and off unit.
§
Cut the plastic banding that holds the refrigerator to the shipping
pallet or skid. Use caution to avoid contact with banding, when
cut.
2 Leave Unit On Skid Until Ready To Wall-Mount
§
Peel the protective white adhesive film from all stainless steel
surfaces [front & sides].
3 Remove Packing & Loose Components
The BBR has two glass rollback doors and loose components that
have been secured so they won
t open or shift during shipping.
Remove any tape and blocking securing the front rollback doors.
Remove any foam blocking and tape used to secure the product
display shelves, if pre-installed. Remove the carton containing
product shelf display components and set aside, if they are not pre-
assembled. Separate Shelf Set-Up Instructions [P/N: 19001091] are
packed with the shelf components.
4 Wash and Sanitize Unit Interior & Shelving Components
CAUTION! The BBR unit weighs up to 210 lbs. Do not attempt to
remove this unit from the shipping skid without assistance.
Note! Use only McDonald
s approved cleaning and sanitizing
agents according to their instructions.
