BBR Operating Manual
Page 10
§
IMPORTANT: Place spirit or laser level on top of unit and verify it is
level left-to-right and front-to-back. [NOTE: Case can be pitched
slightly to rear but not pitched forward.]
§
Plug in power cord at 120-volt/60-Hz outlet identified earlier. Any
excess power cord can be pushed back through hole in left side/top
vented access panel.
2 Shelving Component System
The BBR shelving and product display system has been designed to be
flexible, space efficient, easy to restock and easy to keep clean. The
location and position of individual shelf components and dividers can be
changed to accommodate different refrigerated beverages and other
approved items that require easy-access refrigerated storage.
Each current model BBR Unit ships with the following Shelf System
Components:
Qty.
BBR-35 P/N
Qty.
BBR-45 P/N
Description
1
19001595
1
19001378
One Piece Upper Shelf
2
19001594
3
19001377
Sectional Bottom Shelf
8
19001380
12
19001380
Upper Adjustable Dividers
6
19001000
7
19001000
Lower Adjustable Dividers
Basic Shelf - Display System Assembly
If the unit is delivered with the shelf system in place, it will be set up in
the basic McDonald
s Display Configuration and the shelf system
components shipped in a separate cardboard carton. See Shelf Setup
Instructions [Franke Doc. No. 19001091], which is packed with those
shelf components.
NOTE: Black coated wire shelf
components shown. Your BBR
Case may include all stainless
steel wire shelf components.
