FRANCO srl Manual of use and maintenance UCP-fly
9
1.7 Applications
In the industrial field,
the machine is installed in places where it is necessary to maintain a certain humidity
level, for example in fruits and vegetable refrigerating rooms, in aging warehouses, in the paper and tobacco
industries, and in textile companies.
In agriculture
the machine is used to humidify greenhouses and mushroom farms, and for disinfectant
treatments.
In animal husbandry
the machine is used to cool or nebulize disinfectant or other solutions in the environment.
The casing is made in PE, the screws are in stainless steel, and the remaining parts of the humidifier are made
in PA PC and ABS.
The UCP-fly combines the power of the humidification and the ease of installation.
The water pressure required is the same as in the water supply network (between 2 and 4 atm).
This device must be used only for the functions for which it was intended
and designed: "Adiabatic Cooler
– Humidifier”.
Any other use has to be considered improper and dangerous.
1.8 Versions
The adiabatic cooler/humidifier UCP-fly is available in the following versions:
3108400
Version UCPfly H15 with air flow of 750 m³/h 230V 50Hz
3108500
Version UCPfly H15 with air flow of 750 m³/h 230V 60Hz
3108000
Version UCPfly H20 with air flow of 100m³/h 230V 50Hz
3108200
Version UCPfly H20 with air flow of 1.100m³/h 230V 60Hz
3108100
Version UCPfly H25 with air flow of 1.800m³/h 230V 50Hz
3108300
Version UCPfly H25 with air flow of 1.800m³/h 230V 60Hz
1.9 Identification and data label of the unit
Each machine is identified by the CE plate on which the reference data of the device is inscribed indelibly.
In any communication, either with the manufacturer or with the customer service, always cite these references.
Fig.1.2
The label plate positioning may vary from one device to another.
