background image

FRANCO srl                                                                                                                  Manual of use and maintenance UCP-fly 

 

1.5 Recipients 

 
The manual is addressed to: the installer, the operator, and the qualified personnel entitled to the maintenance 
of the device. 
 

EXPOSED PERSON:

 

refers to any person wholly or partially exposed to a danger zone; 

OPERATOR:

 

refers to those persons responsible for installing, operating, regulating, 
clearing, repairing and moving the machine, and also performing the 
maintenance of the device; 

QUALIFIED PERSONNEL  
QUALIFIED OPERATOR:

 

refers to the persons who have completed specialization courses and 
training, and who have acquired experience in: installing, starting, 
operating, maintaining, repairing and transporting the device, or similar 
ones 

 
The  machine  is  intended  for  industrial  use  (professional  and  not  widespread)  for  which  qualified  operators  are 
needed, in particular, workers who:  

 

Have reached the age of majority; 

 

Are physically and mentally appropriate to perform works which include technical difficulties; 

 

Have been properly educated on the use and maintenance of the machinery; 

 

Have been considered suitable to undertake the assigned job by their employer; 

 

Can understand and interpret the operator’s manual and the safety requirements; 

 

Know the emergency procedures and their implementation; 

 

Possess the ability to operate the specific type of equipment; 

 

Are familiar with the specific applicable rules; 

 

Have understood the operating procedures defined by the manufacturer of the machine. 

  

1.6 Glossary and pictograms 

 
In  this  section  we  list  the  uncommon  terms  included  in  the  manual.  The  following  table  also  explains  the 
abbreviations  used  and  the  meaning  of  the  pictograms  which  indicate  the  qualification  of  the  operator  and  the 
state  of  the  machine;  their  use  can  provide  quick  and  unique  information,  necessary  for  the  proper  use  of  the 
machine under safety conditions. 
 

GLOSSARY (Att. I p. 1.1.1 Dir. 2006/42/CE) 
 
HAZARD 

A potential source of injury or damage to health; 

DANGER ZONE 

Any  area  within  and/or  around  the  machinery  in  which  the 
presence  of  a  person  constitutes  a  risk  to  his/her  health  and 
safety; 

EXPOSED PERSON 

Any  person  that  finds  himself/herself  entirely  or  partially  in  a 
hazardous area; 

OPERATOR 

The  person  installing,  operating,  adjusting,  clearing,  repairing, 
maintaining and moving the machinery; 

RISK 

A combination of the probability and degree of an injury or damage 
to health that can arise in a hazardous situation; 

GUARD 

The part of the machinery used specifically to provide protection by 
means of a physical barrier; 

PROTECTION DEVICE 

The  device  (other  than  a  guard)  that  reduces  the  risk  of  an 
operation, either alone or in conjunction with a guard; 

INTENDED USE 

Use of the machinery according to the information provided in the 
instruction manual;  

REASONABLY FORESEEABLE 
MISURE 

Use  of  the  machinery  in  a  way  not  intended  in  the  instruction 
manual, which may result from a foreseeable human behavior. 

 
 

Summary of Contents for UCP-fly

























Reviews: