6 - Operating Instructions
This equipment is designed for use out of doors, in free air. Never place anything on, or cover the
searchlight when in use as this may present a hazard.
The beam of the searchlight can be adjusted to give a variety of beam types. Using the lampholder
focus wheel, the desired beam can be achieved for any particular application.
On the Remote Focus model the beam of the searchlight can be adjusted to give a variety of beam
types. Using the yellow remote focus button on the Control Unit, the desired beam can be achieved
for any particular application. The beam will move continuously through ‘spot’ to ‘flood’. In order to
fix the beam type; simply release the button at the desired position.
Using the template provided mark out and drill the fixing holes through the deck or cabin roof. In
case of cabin control models, a centre hole is also required to allow the mechanism to pass
through.
On an uneven surface when bolting down the searchlight it is necessary to use a suitable sealant,
such as silicone, in order to ensure weather proofed joint.
Please note that if a heater is fitted, it is advisable to leave the heater permanently in the ‘ON’
position in order to remove any condensation. The heater specified on this equipment is self-
regulating and will shut off when the dew point temperature is reached.
This product should not be used for any purpose other than for which it was designed. Any
modifications to the product should not be undertaken without consulting the manufacturer.
