LED Flood Light
Important: Read all instructions prior to installation.
AFL Series
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V0.1 07/02/2019
5yr
Specifications
Safety and Notes
Operating Voltage Range
120–277 VAC
Total Power Consumption
15 W
30 W
50 W
70 W
100 W
Current Draw
0.13 A @120 VAC
0.25 A @120 VAC
0.42 A @120 VAC
0.58 A @120 VAC
0.83 A @120 VAC
Beam Angle
NEMA 5x6 (80°x110°)
Operating Temperature
-40°–113° F (-40°–45° C)
Environmental Rating
IP65
Dimmable
No
Specifications
AFL-xK15-110-x
AFL-xK30-110-x
AFL-xK50-110-x
AFL-xK70-110-x
AFL-xK100-110-x
• Product should be installed and serviced in accordance with
applicable national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched off before performing
any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the
weight of the fixture. Failure to properly support fixture may result
in damage or injury, for which the manufacturer does not
assume responsibility.
AFL-50K50-110-U
Wiring Diagram
Line
Neutral
Ground
Black
L
L
N
N
GND
GND
White
Dim (+)
Dim (-)
Purple
+
+
-
-
Gray
Green
User Manual
Installation Instructions (U-bracket/Yoke Mount)
black L
white N
green
water-proof gasket
lamp
wires
cover of junction-box
screw
knuckle mount
Drill
Wall
hex-key
hex-key
1. Drill holes for mounting and wiring.
2. Loosen light head adjustment screws with hex key.
3. Securely attach light to wall and connect wiring.
4. Rotate light head to desired angle and tighten adjustment screws.
