background image

Installation

Instructions

Oval Headlight Kit

Part No. 1687237

INSTALLATION

1. Models with tube handle bars: Mount the headlight to

the handle bars using the clamp provided.

Models with channel handle bars: Mount the head-
light assembly directly to the handle bars using an
available hole in the channel assembly.

2. Check that the light does not interfere with the opera-

tion of the controls, or control linkage.  If it does, relo-
cate it.

3. Route the wire leads to the engine.

4. Connect the bullet lead to the engine’s stator coil out-

put.

5. Connect the eyelet connector to the foot of the

engine block, secure to one of the engine mounting
bolts.

6. Secure the wires, using the wire ties provided, to the

handle bars away from moving parts.  Be sure all
controls function correctly.

For Fits Intermediate, Pro, and Large Frame Snowthrowers

Figure 1.  Contents

Kit Contents:

Ref

Part No.

Qty.

Description

1

1732322

1

Headlight Assembly

2

2825094

2

Wire Ties

3

1733415

1

Bracket, Clamp

This kit adds an optional headlight to
snowthrowers equipped with an stator coil.

Before beginning any service work turn off the
engine, remove the key, and wait for all
movement to stop.  Wait for hot surfaces like the
muffler and cylinder head to cool.

WARNING

Form No. 1733417-00

Rev. 7/2006

© 2006 Simplicity Manufacturing, Inc. All Rights Reserved

TP 200-4352-00-AT-SN

M A N U F A C T U R I N G ,   I N C .

500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997  USA

Reviews: