___________________________________________________________________________ NT 1965 A - 03/201913
6.1.3
MAIN PAGE, UNIT ON
When the unit is ON, the following screen is displayed:
Alarm icon: This icon is displayed when there are active alarms. If all the alarms present have been viewed,
the icon is fixed, otherwise, if new alarms which have not yet been viewed are displayed, the icon flashes.
Icon for fire mode.
Icon for fan speed.
Icon for boost based on analogue input, or by pressing the
LEFT
and
RIGHT
buttons simultaneously
(remote control arrows).
Icon for night-time ventilation.
TEST
Icon for forced operation.
From the main page, you can access the status pages by pressing the RIGHT button. Press ESC to access the alarm
display page and the history.
6.1.4
UNIT STATUS
There are several procedures for switching the machine on/off:
1)
Via the
corresponding ON/OFF button
On:
press
ESC
for 2 seconds: if all other conditions set are met, the machine switches to "ON".
Off:
press
ESC
for 2 seconds: the machine switches to "OFF".
2)
Using the
On/off via analogue input
control (parameter,
PH05=1
)
On:
close the contact, if all other
conditions set are met, the machine switches to "ON".
Off:
If the contact is open, the machine switches to "OFF via on/off"
Icon for supply
air filter fouling.
Icon for
return filter fouling.
Ventilation speed
Information on the operating mode:
COMFORT: Automatic control of Comfort slot
CP: Automatic control with active presence sensor
ECONOMY: Automatic control of Economy slot
NON-WORKED: Automatic control of non-worked slot
RTC ERROR: Automatic control with RTC error
MANUAL: Manual control
0-10 V SENSOR: Control via the 0-10 V sensor
CO2/VOC SENSOR: Control via the CO2/VOC sensor
IAQ/RH SENSOR: Control via the IAQ/RH sensor
S-VENTILATION: Night-time ventilation
BOOST: Boost of digital input
MORNING BOOST: Morning soft start
FIRE: Fire mode
FIRE (M): Fire dead man's control mode
FILTER TEST: Weekly fouling test of the active filter
Air temperature measured by the sensor used for
the main setting (supply/return)
Operating mode
