STEP 4a:
Take 2 board to timber connectors and fasten them on either side of
the bottom animal barrier gate pole with the screws provided and a power drill.
This will allow the animal barrier gate and board gate to swing as a complete
door. If you are installing this connector onto one-inch profile boards, insert the
spacer block in between the gate to board connector and board before drilling
in your screws.
THIRD
: Add two curved tubes (
18
)
to create the top and the bottom of
the right gate frame. Insert one tube
into the corner connector of the top
hinge and another into the corner
connector of the bottom hinge.
