7
EN
We recommend that the connection of a gas garden heater to liquefied gas cylinders, as well
as its adjustment and checking the tightness of the installation to be made by an authorized
gas equipment installer or authorized service technician in accordance with applicable regu-
lations, which should be confirmed on the product warranty card. Lack of such confirmation
voids the warranty!
DEVICE INSTALLATION AND STORAGE OF BOTTLES SHOULD BE IN COMPLIANCE WITH APPLI-
CABLE LAWS
NEVER USE ANY PARTS OF THE APPLIANCE NOT PROVIDED OR RECOMMENDED BY THE MA-
NUFACTURER!
NOTES ABOUT HANDLING:
This device is designed for easy installation and movement. Before moving it, make sure that all
anti-removal components have been uninstalled, the gas supply has been cut off, and the hose
is disconnected from the heater gas cylinder. Moving the device while it is in operation is strictly
prohibited. After placing the heater in the desired place, secure it against slipping, falling out or
falling over.
WARNING: DO NOT MOVE THE APPLIANCE WHEN IT IS IN OPERATION!
WARNING!
The OUTDOORFIRE gas garden heater is adapted to work with a cylinder or a household tank of a
propane-butane gas mixture. The flexible connection pipe should be intended for LPG from the
cylinder.
The device is sold with complete automation and tubes connecting the main burner and pilot
burner with the valve. Do not use replacement system components other than those installed or
supplied by the manufacturer or recommended by your dealer or manufacturer.
FOR OUTDOORFIRE W and OUTDOORFIRE B WITH GV32 MANUAL CONTROL:
• A complete, ready-to-use burner with a full gas control control system armed with the MERTIK MA
-
XITROL GV32 controller.
• A set of decorative stones for a burner.
• Installation and operating instructions.
• Steel body with wheels and stabilizing feet.
• 0.6 m hose with regulator and anti-tilt safety valve
INSTALLATION - INTRODUCTION
The device has an open combustion chamber without the option of connecting it to a chimney flue.
The OUTDOORFIRE gas garden heater is sold with the pre-installed gas control control system, howe-
ver, before the first use it is recommended to check the tightness of the system due to the possibility
of its unsealing in transport. All instructions on how to properly connect the system, installation in the
table and frame can be found below in the following instructions.
All European type GAS cylinders up to 11 kg weight and not wider than 33 cm or higher than 65
cm are compatible with the appliance.
INSTALLATION RULES
Installation should be carried out in accordance with the requirements of the law in force in the given
country or region. In the absence of such provisions, the rules contained in this manual and the princi-
ples of fire safety should be followed.
This appliance has been tested for quality and safety and has been certified by a notified testing la-
boratory.
