3. MOBILE AND EASY TO USE
• The device can be easily moved from one room to another.
• The amount of air can be adjusted according to three ventilation levels.
• Installation by a qualified service is not required.
• Simply connect it to a normal household socket with the voltage of 220-240V/50Hz.
• The air exhaust pipe can be stored in the unit during transport and when the air conditioner is not used.
• Do not connect the hot air pipe to air ducts. This may cause damage to the equipment excluded from the warranty. Ensure free
outflow of hot air from the exhaust pipe to the environment.
• Do not extend the hot air pipe beyond the maximum total length of the pipe that is 3 meters. The operating temperature of the
device in such case cannot exceed 32°C. Otherwise, this may cause damage to the equipment excluded from the warranty.
4. THE SET SHOULD CONTAIN:
5. INSTALLATION
1 x central unit (1)
1 x remote control
1 x small flattened pipe end
1 x air exhaust pipe 1.3 linear meter, diameter of 15 cm (2)
1 x hot air pipe adapter (3)
1 x top part protecting the device (4)
1 x bottom part protecting the device (5)
Note:
Wait 3-4 hours before turning on the device, and leave the device in an
upright position.
The device can be easily moved from one place to another. While moving the
device, remember to keep it in an upright position all the time, and then to place
it on a flat surface.
Unpacking the device
• Open the box and remove all protective elements.
• Grab the cold air outlet of the device on the sides and carefully remove the
device from the foam base
• Hold it and tilt the device slightly to remove the pipe, the hot air pipe adapter
and the small flattened pipe end from the base.
• Install the air exhaust pipe
Remove the air exhaust pipe from the base of the air conditioner. The elements of the flat pipe end A and B are inside the pipe.
Prepare both parts and connect them together. Do not press too hard, as this may cause damage.
1. Insert the flat pipe end and turn it three times until it is tightened.
2. Assemble the connected pipe with the end.
3. Screw the pipe into the air conditioner, turn it at least three times. The process is presented below:
FRAL SUPER COOL FSC09C
PORTABLE AIR CONDITIONER
15
INST. _PL_EN_DE_FSC09C_WER.3
