FP optimail 30, Operator'S Manual, Page: 116 / 148

optimail 30 Operator Manual 116
Installing the rocker with moistening felt
The rocker features two clips that engage on
the two bolts at the sealer.
• Fit the new rocker such that one leg of the
leg spring is located in the rocker groove
and the other leg in the sealer slot.
• Hold sealer in place and, exerting moder-
ate pressure, push the rocker onto the
sealer such that the two clips engage on
the bolts.
Check
• Check the correct seat:
– The absorption felt must be perpendicu-
larly suspended in the water reservoir.
Its lower edge should roughly reach the
bottom.
– The gap between rocker and sealer
housing must be uniform. (The rocker
must neither jut out nor touch the hous-
ing.)
• Fill the sealer (see page 113).
• Connect the sealer to the franking
machine.
For further information on how to connect the
sealer to the franking machine please refer to
the Installation Guide.
Leg spring
Bolt
Clip
Absorption felt
Rocker
Uniform gap