15
1. Long press the power button, the power indicator light is
on
, and
then according to the speed of the release action of the button to
decide whether the computer is turned on or not.
2. Release the power button after the first short sound of the
buzzer. At this time, the remote control is switched on and the
computer is not switched on.
3. After hearing the second short sound of the buzzer, loosen the
power button. After starting up the remote control, the computer
will display the starting interface and start up.
4. After using the computer, the computer can be shutdown
through shutdown interface or the power button.
5. Long press the power button to turn off. In the process of
shutdown, if the system detects that the computer is in the boot
state, the system will first shut down the computer before shutting
down the remote control.
1. When you do not use your computer for a long time, please
turn it off in time to avoid the power consumption.
2. If it is found that the long press the power button
cannot start up the system, it is likely that the battery is
with low capacity. Please charge it by standard adapter.
6.2 Indicator Instruction of Remote Controller and
Receiver
Indicator instruction of remote controller
Indicator
Status
Define
Receiving and
transmitting
indicator TX
flicker
V20: the module with data
transmitting
V30: working indicator
Off
V20: the module without
data transmitting
V30: no communication
Receiving and
transmitting
indicator RX
flicker
V20: the module with data
receiving
V30: Off
Off
V20: the module without
