18
6.4 Operation Instruction of V20 in Normal Connection
Status
Start the remote controller, V20 receiver is powered on. After the
successful connection of 2 modules, CPU indication will be
ON
, signal
indicators are constant, this process takes about 1 min, the device can
work normally.
All the parameters have been configured well before delivery. The
device can be used directly.
For baud rate and IP address modification of the video transmission
module, pls refer to below:
The default parameters:
User name: admin
Password: ADMIN
LAN IP address: 192.168.168.11(receiver);192.168.168.12(remote
control)
Baud rate of serial port
：
115200
，
8N1
6.5 Instruction of Parameters Setting Software of Remote
Controller
