Page | 31
to in the “Move To” box (located below the right side column). This will move
the sound to your designated number. You can also highlight the sound that
you wish to move on the right column, and then click on the up or down arrows
below the right side column to move the sound one position at a time. If you
would like to reset your list at any time, click on the Clear/Reset List button
located on the right side of the screen. This will reset the list to its initial sounds.
8. Click on the “Copy to Caller” button located on the right side of the screen.
Your sounds will now be programmed to your PRAIRIE BLASTER.
NOTE:
Your PRAIRIE BLASTER will play .FXP, .24b .mp3 and .wav files.
Other file types are not supported. Although you may store .FXP and .24b
sounds on your computer for later use, they cannot be played on your
computer, or on any audio player other than a FOXPRO caller.
8.4 DOWNLOADING NEW PLAYLIST TO TX-505
Program your sounds into the PRAIRIE BLASTER as outlined in the instruction
manual. Make certain that you do not use the same number for more than one
sound! NOTE that the transmitter can only display 21 characters per line. The
first 3 characters must be the sound number, from “000” through “499”. Place a
space between the sound number and the sound name. 17 characters remain
for the sound name. Although the sound name can have more characters, the
TX-505 will only display the first 17 characters. Any additional ones will not be
displayed.
1. Disconnect all accessories from the PRAIRIE BLASTER (i.e. charger,
speakers, etc.)
2. Turn the power off on both the PRAIRIE BLASTER and the TX-505.
3. Turn on the TX-505 and PRAIRIE BLASTER.
4. Access the Main Menu
5. Enter the TX505 CONFIG menu
6. Highlight the UPLOAD SOUND LIST menu item and press down on the
selector knob one time
7. Make sure the PRAIRIE BLASTER is within 3 feet of the TX-505
8. A progress bar on the TX-505 display will indicate the
playlist is being transferred
NOTE:
This process may take a few minutes. DO NOT turn
off the TX-505 or PRAIRIE BLASTER during this process.
