Page | 26
AUTO-V ON & AUTO-V OFF
You can turn AUTO-V on or off by highlighting the desired one and press
down on the selector knob one time. See section on AUTO-V for more
details.
7.2 TX505 CONFIG MENU
This menu allows to you setup how the TX-505 will operate. Everything from
contrast to how the AUX button performs will be configurable through these
menus.
AUX
This option allows you to specify whether the AUX function will be
momentary or latched. To change the AUX settings, use the selector to
highlight the desired option then press down on the selector knob one time.
NOTE:
FOXPRO’s Jack-in-the-Box Decoy requires that the AUX function be
setup for momentary. Please check the specifications on the device you are
trying to operate prior to connecting it to your Prairie Blaster.
DISPLAY
The display menu has many submenus that will customize the TX-505.
Each one will be discussed. To enter the submenu, simply highlight the
desired one and press down on the selector knob one time.
Text
There are two options for text; NORMAL and LARGE NUMBERS ONLY.
The vast majority of users will leave this setting on NORMAL, but for those
who have trouble reading the information on the screen, you are invited to
use the LARGE setting. To change the text settings, use the selector to
highlight the desired option then press down on the selector knob one time.
Graphics
The graphics menu allows you to control whether the screen NORMAL or
REVERSE IMAGE. Reversing the image may be beneficial for users who
are hunting at night to help reduce the glow from the screen. You can also
set the contrast. To change the graphics settings, use the selector to
highlight the desired option then press down on the selector knob one time.
To set the contrast, highlight the SET CONTRAST option and press down
on the selector knob. You will see a cursor appear in the middle of the
screen. The middle position is the default position. To make adjustments,
rotate the selector knob clockwise or counterclockwise to set the bar.
Moving the cursor to the left will decrease the contrast and to the right will
increase. Once you have a desired setting picked, press down on the
selector knob one time to lock it in.
