Page | 18
name the file in the format of S00.seq through S09.seq so that the Prairie
Blaster will recognize it as a valid sequence file. NOTEpad will try to name the
file .txt by default; this must be changed to .seq. You can add a description to
the file title as in the following examples:
S00 Stand 1.seq
S02 Bobcat Special.seq
S01 Stand 2.seq
S03 Coyote.seq
Loading a Sound Sequence to Your Prairie Blaster Manually
In order to get the sound sequence file from your computer into your Prairie
Blaster, you will need to locate a USB (type A/B) cable. Remove the battery
compartment door on the Prairie Blaster and remove the battery pack. Locate
the USB port in the bottom of the battery compartment. Using the USB cable,
connect the Prairie Blaster to your computer. Take NOTE to what drive letter is
being assigned to your Prairie Blaster. Copy the sequence files from your hard
drive directly into the drive letter of the Prairie Blaster.
Playing a Sequence
Sequences can be engaged at any time during operation.
1. Press the SEQUENCE button on the TX-505
2. Press a number button on the keypad to play the corresponding
sequence from 0 – 9 or highlight the desired sequence with the rotary
selector knob and depress it one time.
Play Modes and Sequences
If you have selected a different playback mode (i.e. jukebox or single)
sequence mode will ignore this selection.
6.8 SOUND PRESETS
The TX-505 provides you with quick access to your favorite sounds and
volumes with the push of a button. The TX-505 can hold a total of ten individual
sound presets, each one having their own unique volume level. You will also
find two quick-access buttons (P1 and P2) that provide you one-button access
to the sounds stored on presets one and two.
Creating Presets
1. Press the PRESET button and hold for approximately 3-4 seconds to
enter set preset mode. You should see SEL SND/ VOL on the top line
of the TX-505 display.
2. Use volume up/down buttons to set the desired volume level
3. Select the desired sound by using the rotary selector knob to highlight
it on the screen and then press the selector knob down one time.
4. To lock the selected volume and sound in, press the desired number
(0-9) for that preset on the keypad. When pressing the number button,
this exits you from set preset mode and you are now in the preset
