Page | 20
the sound of the rabbit on the right channel will be reduced. If you move the bar
to the right and lock the selection in, the sound of the coyote will be reduced.
FOXFADE can help create many new scenarios in the field and help add
realism to your stand.
Using a Mono File in Stereo Mode
If you are playing a mono file while operating the unit in stereo mode, the
Prairie Blaster will play the same sound out of both speakers. FOXFADE will
act in the same manner as playing a stereo file with fading out the volume of
one of the channels depending upon which way you move the bar.
6.10 AUTO-V
AUTO-V (auto-volume) provides you with a sort of “cruise control” for volume
adjustment and attenuation. When engaged, AUTO-V will start at the lowest
possible volume (0) and slowly climbs to 75% or volume level 30 which is the
default maximum volume level for AUTO-V, across a three minute period. Once
volume level 30 is reached, AUTO-V begins to reduce and increase the volume
level by 30% increments every ten seconds. For example, volume level 30 will
be reduced by 30% in a ten second period, and then increased back up 30%
across another ten second period. It will continue operating in this manner until
it is shut off.
NOTE:
When using PRESETS while AUTO-V is enabled, the preset volume control may
not be recognized. For proper operation while using PRESETS, turn AUTO-V off.
Turning AUTO-V On
It is not necessary that you have a sound playing prior to engaging AUTO-V as
it will begin its cycle after the sound begins playback.
1. Hold down the selector knob for 2-3 seconds to access the main menu.
2. Select PRAIRIE BLASTER CONTROL
3. Select AUTO-V ON to engage AUTO-V
4. Exit the menu
AUTO-V will begin its volume adjustment cycle as soon as you begin playing a
sound. You will also see the AV indicator on the top line of the TX-505 screen
show ON.
Turning AUTO-V Off
AUTO-V can be turned off at any point during operation. When AUTO-V is
disengaged, the Prairie Blaster will continue playing the current sound at 65%
of the maximum volume to help prevent an erratic volume level change.
1. Hold down the selector knob for 2-3 seconds to access the main menu.
2. Select PRAIRIE BLASTER CONTROL
