In the left drop-down box, the internal clock, the HD2 operates on, can be selected. If you chose to use
FIR filters in the first dialog.
The multipath options allow to combine several output paths internally and feed, e.g. a speaker with a
passive crossover inside. That is, the speaker is internally treated as a 2 or 3-way speaker (limiters,
filters can be set as for a 2 or 3 way system). The signals at the outputs are, then, added up and fed to
a full-range speaker.
Note: FIR filters provide values for clock and multipath. If you selected FIR filters in the X-Over dialog,
the controls automatically show these values and are disabled.
When you click next, the last page appears (not shown here) and with the
Finish
button, the settings
are transferred to the HD2.
17
Fig. 10: Multipath and clock options in the config wizard