Issue Date: 09-18-07 Rev. Date: 04-24-08 Rev. Level: 04 ECN: n/a OIPM P/N: 3420204
Page 8 of 9
REPLACEMENT PARTS LIST
ITEM QTY VOLTAGE
OCH-46
PART NO.
OCH-57
PART NO.
DESCRIPTION
1
1
N/A 8561801 8560401
REFLECTOR
2
2
4
N/A
8561201
2326500
REFLECTOR END CAP
SCREW 8-32 X 3/8
3 1
120
208
240
277
480
04432302
04418102
04418002
04419302
N/A
N/A
04416602
04414702
04419402
04419502
QUARTZ TUBE
4
2
4
4
N/A
8561000
2402739
3447239
ADJUSTABLE MOUNTING BRACKETS
SCREW 10-32 X ½
NUT STOP 10-32
5 1 N/A
3440300
CHAIN KIT
STEP #3
Wiring
1. Factory installed black lead:
a. Route the lead wire thru the chase nipple into the electrical box assembly.
b. Trim lead wire to approx 6 inches in length and strip end approx 1/2 inch.
c. 120V, 208V and 240V units: Using one of the supplied wire nuts, attach this lead wire to the
black lead wire of the cordset.
d. 277V and 480V units: Using one of the supplied wire nuts, attach this lead to L1 of your
power supply.
2. Lead wire supplied in the hardware package:
a. Trim the lead wire to approx 6 inches in length;
DO NOT
cut off the ring terminal.
b. Strip end opposite of the ring terminal approx. 1/2 inch.
c. 120V, 208V and 240V units: Using the remaining wire nut, attach this lead wire to the white
lead wire of the cord or cordset.
d. 277V and 480V units: Using the remaining wire nut, attach this lead to L2 of your power
supply.
3. 480V units only: Attach a bonding* (ground) lead to the green screw located in the electrical box
assembly.
STEP #4
Attach the cover supplied with kit to the electrical box assembly.
STEP #5
Follow the installation instruction starting on page 4 of this manual.
WIRING INSTRUCTIONS continued
