Foster GHOST 2451 946, Manual

Page: 13 / 24

Once the installation is complete and after
connecting the appliance to the mains power,
lift up the downdraft and remove the door
block (Fig. 4) ; then open the door (Fig. 5) and
fit the filters in place
(Fig. 6)
. In the version
of the Downdraft equipped with internal motor,
install the power unit orienting the air outlet to
the desired position, either downwards or up-
wards (Fig. 7) .
The motor can be installed either on the front
or rear side of the downdraft After having in-
stalled the motor, connect the air ducts.
For versions with external motor, place the
suctioning unit (external motor) in a suitable
area and fit the exhaust air flue as illustrated.
Then fit the air outlet ducts between the ex-
ternal motor and the downdraft. Select an air
outlet from the five possibilities (Fig. 9) and fit
the union supplied with the appliance.
Place the metal box with the electronic com-
ponents in an easily reachable area for even-
tual technical assistance operations. (Fig. 9) ,
connecting the three connectors (9 pole con-
nector for the actuator control and the safety
control, 4 pole connector for neon lamp turn
on and push-button connector) (Fig. 10) .
For external motors, connect the motor unit
cable to the relevant connector on the elec-
trical components box.
Power the cookerhood.
7.
8.
9.
10.
11.
After choosing the hole for the power cable
entry, open the hole by removing the metal
material with a tool.
Place a special cable gland (not supplied) and
insert the power cable. Connect the files for
power supply and connect the ground wire
into the screw using an eyelet connector.
Then connect the 6-pole motor connector to
the connector in the wiring box.
13 SU-DD2