Foster GHOST 2451 946, Manual

Page: 8 / 24

WARNING
Thank you for purchasing a Foster Range Hood.
Please read all the instructions in this manual before instal-
ling the appliance.
Save these instructions for future reference.
Only use this appliance as an exhaust ventilation system for the removal of cooking
vapors. DO NOT use to expel flammable substances or any other materials or va-
pors.
The installation procedures in this manual are intended for qualified installers, servi-
ce technicians or persons with similar qualified background.
DO NOT attempt to install this appliance yourself.
Ensure that electrical power is turned off at source before commencing installation.
All electrical wiring must be properly installed, insulated and grounded and conform
to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work should be
replaced, if necessary, to avoid the possibility of a grease fire. Check all joints on
ductwork to ensure proper connection and all joints should be properly taped. Be
careful when cutting through ceilings or walls not to damage any hidden pipes or
electrical wiring. Ensure your kitchen has sufficient air return vents to replace the
exhausted air.
Fan ducts should always be vented to the outside of your home and never into spa-
ces within walls, ceilings, lofts or attics. Only use rigid, smooth steel for ducting. The
exhaust point of the blower requires a 6” round connection.
EN
8 SU-DD2