manualshive.com logo in svg

Foss NIRS DS3, User Manual

Share
Download
Foss NIRS DS3 User Manual Download Page 35

 

frequently a reboot is needed depends on the PC, but leaving it on for months is not 
recommended.) 

The instrument and ISIscan Nova software are turned on and off separately. 
Shutting down the software will not turn off the instrument or the lamp inside it. 

To turn off the analyser: 

1.

 

Go to the 

Care

 view. 

2.

 

Click 

Close

 

application

. 

3.

 

Click 

OK 

to shut down the software. 

4.

 

The power to the instrument and the lamp will still be on. To completely turn 
off the instrument, shut off the power with the on/off switch on the rear panel. 

 

The 

Care

 view contains features not related to routine analysis. By default, five 

buttons are visible. 

 

Fig. 33

 

Care menu - default features 

 

 

 

Fig. 34

 

 

Running Instrument Diagnostics will carry out the same tests and with the same 
test limits as during the start-up test. The outcome of the Instrument Diagnostics 
will be displayed as passed or failed on the screen. 

Summary of Contents for NIRS DS3























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands