manualshive.com logo in svg

Foss NIRS DA1650, User Manual

Share
Download
Foss NIRS DA1650 User Manual Download Page 22

NIRS™ DA1650

3:2

User Manual 6008 1286 / Rev. 8

3.5

PC connection for Mosaic Solo

Instruments are configured with Foss standard setup and purchased calibrations at 

the time of delivery. So a PC only needs to be connected if changes from the standard 

setup is required. Connect the instrument to the PC in a way that is suitable for the 

current installation.

3.5.1

Installation of Mosaic Solo on external PC

For carrying out Configurations and other tasks in Mosaic Solo (when running the 

instrument in Solo mode, see 2.4) you need to connect an external PC to the NIRS 

DA1650 via the Ethernet port on the back of the instrument. 
An installation instruction is delivered with the ISIscan Nova software describing 

how to connect and install Mosaic Solo on the external PC. This instruction also 

contains a guide for the initial configuration required in Mosaic Solo during 

installation.
Connecting a PC, installing Mosaic Solo and initial configuration is normally done 

at time of instrument installation by a trained technician.
Mosaic Solo is operated from an external computer which needs to be connected the 

NIRS DA1650 via an Ethernet cable. 
The installation files for installation of Mosaic Solo are located on a shared folder 

inside the NIRS DA1650 and these are accessible via the PC's browser.
Make sure the NIRS DA1650 is switched on and connected to the PC.

1. Start Explorer on the external PC.
2.  Enter the IP address or the Name of the internal computer inside NIRS DA1650 

like the example below. 

Fig. 3:1

3. Press Enter.
The IP address and Computer Name can be found under Instrument Information in 

the Care View of ISIscan Nova.

Summary of Contents for NIRS DA1650









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands