User Manual 6007 2981 / Rev. 10
4:23
Graphs
The belt profiles shown in the graphs are the same as in the summary table. They are
used for additional information and to find the root cause of the warnings.
Images of 2D Calibration Targets
The gray images at the end of the report are mainly for experts and can be difficult
to interpret.
4.8
Analysing a Sample
Samples can be analysed either one by one without setting anything up, or as a batch
job with multiple sample in one setting. Both scenarios are described below.
4.8.1
Single Sample
The instrument must be in “Standby” mode before any samples can be analysed.
1.
Click the orange Play button to put the instrument in “Standby” mode.
Fig. 4:52
2.
Pour in a sample in the funnel and double-click on the application you want to
run (in this example “Barley BA_g08_v22_g02”).
Fig. 4:53
The analysis will now start, and a green progress bar will be shown at the bottom of
the window.
Fig. 4:54
For description on how to make a quick job, see section 4.6 step 11.
When the sample is ready, a box for the Sample ID will appear in the
Results
section
(see Fig. 4:55).
