User Manual 6007 2981 / Rev. 10
4:15
13. Place a single kernal on the belt and run the quick job.
The sampel will be analysed return out of the belt.
4.6
Making a Zero Setting (Calibration)
The zero application is a calibration of the instrument and must be done every day.
Start by downloading a prediction model to the PC.
Prediction models can be copied directly to the following directory (if it doesn't exist,
simply create it):
C:\FossIntegratorData\PredictionModels
or they can downloaded
through Mosaic.
As no prediction model is used during the Zero setting, any prediction model will be
fine, but there must be a prediction model and it must be set up in the correct way.
1.
Go to
Foss Integrator [Settings]
and select
Product Settings
similar to setting
up a normal product.
Fig. 4:35
2.
Right-click and select
New
....
Fig. 4:36
