Fortress Technologies S1, Manual

Page: 9 / 63

4
Main Panel Features
The S1 GSM WiFi main panel is able to act as a stand-alone
local alarm with wireless accessories. It is also able to act as
a self-monitored system when connected through an ex-
isting WiFi signal and/or a GSM SIM card. The system is
also compatible with Contact ID central monitoring com-
panies (
with active SIM card required
).
The Fortress wireless accessories use a 433MHz radio sig-
nal to communicate with the main panel. These accessories
have a range of about 150 feet from the main panel. Keep
in mind that the 433MHz radio signal will be blocked by
brick walls, concrete walls, metal sheets, and other dense
materials. Line of sight is best for wireless communications,
but regular drywall should not block the signal. We also
have optional Fortress wireless signal repeaters available
for sale. These signal repeaters will re-broadcast signals
that they receive at a higher strength, which can effectively
increase the range of the system by another 200 to 400 feet.
Signals and Communication
Buttons and Ports
The buttons and ports on the S1 GSM WiFi main panel are
labeled as shown.
Central Button
The Central Button is used to arm the system (in
both Away Mode and Home Mode), and disarm
the system. If the alarm has been triggered, then
you can press and hold this button for 10 seconds to
disarm the system. When the system is disarmed,
press and hold this button to trigger the SOS.