34
Fe
26
AXIS INSTALLATION
Fig. 3
Step 2:
Bottom Bracket Installation Continued
1. Use Spring Punch to mark the holes.
As shown in Fig. 1.
2. Drill out bracket hole with a 3/16” [5mm] drill bit.
As
shown in Fig. 2.
3. Use T-25 screws to attach the base to the post. Begin with
bottom hole then top. As shown in Fig. 3.
4. Keep bracket base centered as you install second screw.
5. Insert barrel & screw to re-assemble bracket.
6. Tighten barrel & screw. As shown in Fig. 4.
Note:
• Lower Post may need to be unmounted to install bracket
then remounted.
Fig. 1
Fig. 2
