12
Fe
26
AXIS INSTALLATION
Fig. 1
Step 3:
Cut Rails & Pickets
1. Cut top and bottom rails using a Portable Band Saw
,
Circular
Saw or Grinder with a cutoff disc. Be sure to follow
cut marks on top and side faces. As shown in Fig. 1.
2. Use a circular saw or hand grinder to cut pickets.
Tip:
• Be sure to support rails and pickets when making cuts.
• When cutting pickets, clamp a straight wood 2” x 4”
[60mm x 102mm]
to create a straight edge for the circular
saw to follow. As shown in Fig. 2.
• Always having the opposite upright installed makes it
easier to cut while keeping the rails and pickets in place.
• Be sure to follow cut marks on top and side faces.
• Be sure to not over heat the rails and picket when making
cuts with a grinder.
• Before installing upright, empty cutting debris from
pickets and rails.
Fig. 6
Fig. 7
- 1/4” [6mm]
Cut mark
Reference mark
Straightened
Cut mark
Picket
Rail
