background image

Contents

4

 01-28008-0017-20050128

Fortinet Inc.

Using the command line interface.....................................................................................  30

Configuring the FortiGate unit to operate in NAT/Route mode .....................................  30

Using the setup wizard......................................................................................................  32

Starting the setup wizard ..............................................................................................  33

Connecting the FortiGate unit to the network(s) ...............................................................  34
Configuring the networks ..................................................................................................  35
Configuring the Modem interface......................................................................................  35
Next steps .........................................................................................................................  35

Transparent mode installation............................................................................  37

Preparing to configure Transparent mode ........................................................................  37
Using the web-based manager .........................................................................................  38

Reconnecting to the web-based manager ....................................................................  39

Using the command line interface.....................................................................................  39
Using the setup wizard......................................................................................................  41

Reconnecting to the web-based manager ....................................................................  41

Connecting the FortiGate unit to your network .................................................................  42
Next steps .........................................................................................................................  42

Configuring the modem interface ......................................................................  45

Selecting a modem mode .................................................................................................  45

Redundant mode configuration.....................................................................................  45
Standalone mode configuration ....................................................................................  46

Configuring modem settings .............................................................................................  47
Connecting and disconnecting the modem in Standalone mode......................................  48
Defining a Ping Server ......................................................................................................  49

Dead gateway detection ...............................................................................................  49

Adding firewall policies for modem connections ...............................................................  50

Index ...................................................................................................................... 51

Summary of Contents for FortiGate 50A





















































Reviews: