Fortinet FortiGate 50A Installation Manual Download Page 9 | Manualshive

Page: 9 / 52

Fortinet FortiGate 50A Installation Manual Download Page 9

Introduction

Related documentation

FortiGate-50A Installation Guide

01-28008-0017-20050128

9

Fortinet Knowledge Center

The most recent Fortinet technical documentation is available from the Fortinet
Knowledge Center. The knowledge center contains short how-to articles, FAQs,
technical notes, product and feature guides, and much more. Visit the Fortinet
Knowledge Center at

http://kc.forticare.com

.

Comments on Fortinet technical documentation

Please send information about any errors or omissions in this document, or any
Fortinet technical documentation, to [email protected].

Related documentation

Additional information about Fortinet products is available from the following related
documentation.

FortiManager documentation

• FortiManager QuickStart Guide

Explains how to install the FortiManager Console, set up the FortiManager Server,
and configure basic settings.

•

FortiManager System Administration Guide

Describes how to use the FortiManager System to manage FortiGate devices.

•

FortiManager System online help

Provides a searchable version of the

Administration Guide

in HTML format. You

can access online help from the FortiManager Console as you work.

FortiClient documentation

• FortiClient Host Security User Guide

Describes how to use FortiClient Host Security software to set up a VPN
connection from your computer to remote networks, scan your computer for
viruses, and restrict access to your computer and applications by setting up firewall
policies.

•

FortiClient Host Security online help

Provides information and procedures for using and configuring the FortiClient
software.

«
...
7
8
9
10
11
...
»

Summary of Contents for FortiGate 50A





















































Reviews:

No comments