background image

 

2

CONTENTS  

 

1 INTRODUCTION................................................................3 
2 INTENDED USE .................................................................. 3 
3 SPECIFICATIONS  .............................................................. 3 
4. SYSTEM COMPONENTS ................................................. 5 
 
5. SYSTEM ARRANGEMENT & OPERATION .................. 6 
5.1. System Principle of Operation ........................................ . 6 
5.2. Description of the System Structure.................................. 7 
5.3 Charger Structure & Operation................................. ......... 8 
6. SYSTEM CONSTRUCTION................. ............................. 9 
6.1. Rx Construction (fig.6.1).  ................................................ 9 
6.2. Tx Construction ................................................................ 10 
6.3. Pole Construction (fig.6.2)................................................ 10 
6.4. RC Rx Construction (fig 6.3). ........................................... 11 
6.5. Charger Construction (fig.6.4). ......................................... 12 
6.6. Remote Antenna Construction (fig. 6.5). .......................... 13 
7. SAFETY MEASURES........................................................14 
8 MOUNTING ......................................................................... 14 
8.1. Requirements to the Sector Landform and Application 

 Conditions…………………………………………………...  14 

8.2. Pole Mounting…………………………………….………15 

8.3. Mounting & Supply Switching-On of Tx (Rx)…………...15 

8.4. Rx (Tx) Positioning .......................................................... 16 
8.5. RC Rx & Remote Antenna Installation…………………...16 

8.6. Connection of RC Rx to the Charger……………………..17 

8.7. Connection of RC Rx to DAPS ........................................ 17 
8.8. Sectors Setting to Standby Mode…………………………17 

8.9 Sectors Setting to “Automatic Control” Mode .................. 18 
9. SYSTEM DEPLOYMENT.................................................. 19 
10 SYSTEM OPERATION  .................................................... 20 
10.1 Operation Procedure ........................................................ 20 
10.2 Storage Battery Charge Procedure   ................................. 20 
11 MAINTENANCE ............................................................... 21 
11.1 General Instructions  ........................................................ 21 
11.2 Maintenance Procedure ................................................... 21 
11.3 SB Replacement in Tx (Rx)……………………………..22 

12. TROUBLESHOOTING GUIDE ....................................... 22 
13. STORAGE .. ...................................................................... 23 
14. TRANSPORT  ................................................................... 23

 

Summary of Contents for FORTEZA-12
























Reviews: