3
1. INTRODUCTION
The present description and operating manual 4372-43071246-007
ТО
contains information about the
alarm microwave quickly-deployed system “Forteza-12” (hereinafter referred to as the system). In the
description there is information required for the system correct operation and its constant keeping ready
for operation.
The following abbreviations are used in the present document:
Tx
- a local transmitter;
Rx
- a local receiver with a radio channel transmitter;
RC Rx - a radio channel receiver;
C
- a charger;
DAPS
- a data acquisition and processing system;
SB
- a storage battery;
BDC
- battery discharge control;
AC -
automati
с
control.
2 INTENDED USE
2.1 “Forteza-12” system is a mobile perimeter microwave detector. It is intended to provide temporary
protective boundaries up to 1000 m long of different configuration. Communication lines laying is not
required. Power supply of the system units is off-line. Alarms are transmitted to RC Rx over a radio
channel.
2.2 The system is intended for continuous work up to 7 days minimum at the outdoor temperature
+20°
С
. It keeps operating at the ambient temperature -40…+50
°
С
(local equipment), -20…+50
°
С
(radio
channel receiver) and relative humidity up to 98% at the tempe35
°
С
.
2.3 Chargers included in the system provide charging storage batteries (SB) without their removing
from the units.
2.4 A charger is intended for continuous indoor operation at the ambient temperature 0…+50
°
С
,
thereto, the optimal temperature range is +15…+35
o
C when charging SB.
3 SPECIFICATIONS
3.1 The maximum number of the sectors in the system is 20.
3.2 The detection zone length of one sector is 5…50 m.
3.3 The detection zone width of the sector at the maximum length is 8 m maximum.
3.4 The system generates an alarm:
-
when an intruder circulates in a detection zone to his full height or “bended” at speed 0,3…6
m/sec;
-
when there is no signal from Tx including those cases when Tx SB.
