9
beaming can be turned to the angle 350° minimum about the lower one. Radio channel transmitter 4 is
also located in cylinder 5.
6.1.3
On base 9 there are two buttons of power supply 11; on the cover of the storage
compartment there is a PC4 plug to connect charger 12. When SB charging is over, PC4 socket is closed
with a cap.
1 – bottom
2 – SB
- 1 item;
- 1 item;
8 – tube
9 – base
- 1 item;
- 1 item;
3 – lower cylinder
- 1 item;
10 – hood
- 1 item;
4 – plate of radio channel transmitter
- 1 item;
11 – power supply button
- 2 items;
5 – upper cylinder
- 1 item;
12 –
РС
4 socket to connect a
6 – Rx handle
- 1 item;
charger with a cap
- 1 item.
7 – receiver of beaming (upper and
lower)
- 2 items;
Fig. 6.1
6.2
Tx Construction
6.2.1
Tx construction is similar to Rx construction. The difference is that radiators are used in
upper cylinder 5 instead of the receivers of beaming; there is no radio channel transmitter.
6.2.2
The axis of the directional pattern of the lower radiator corresponds to the direction of the
mark on the cap; the axis of the directional pattern of the upper radiator corresponds to the pointer on the
handle.
6.3
Pole Construction (fig.6.2).
