FORTEZA JSC
FORTEZA FMC 24 (50m, 100m, 200m)
Please visit our internet sites:
of 1-2 m and make a pause from 5 to 7 sec. Otherwise, the results of the previous passage
can influence on the next one.
Fig.2.16
2.5.5.5.
You can change the minimum detected speed in m/s (Vmin), the maximum
detected speed in m/s (Vmax). You can confirm your settings with ‘Apply’ button.
Note: Too big speed range has higher false alarm rate, too low speed range has poor
sensitivity.
2.5.5.6. Setup method: Manual
In ‘Manual’ setup method you can set sensitivity. But
in most of the case ‘Auto’ mode and default sensitivity value is recommended. You can send
your setting to the receiver with ‘Apply’ button, or you can cancel your settings with
‘Cancel’ button.
Note: Black line – signal between transmitter and receiver
Green and Blue – 1 section alarm thresholds
Red – 2 section alarm threshold
