FORTEZA JSC
FORTEZA FMC 24 (50m, 100m, 200m)
Please visit our internet sites:
2.5.2.
Sensor Connection with computer.
For FMC 50/100/200 detectors is using
converter RS485/USB.
You can choose 2 variants for connections.
1)
Connect the programming extension cable throw converter to the receiver socket “RS-
485” using the connection cable
from FORTEZA RS- 485/USB kit. (see Table 8.1)
2)
Connect the programming converter RS-485 to connection cables RS A or RS B
(white and green) from RX 8-cable (see Table 2.2)
2.5.3. Forteza FMC software menu.
2.5.3.1.
After unzipping the Forteza FMC adjustment software, if you double click
Forteza_FMC.exe, it starts immediately (without any installation). The following initial
screen will appear:
2.5.3.2.
Please select the proper communication port from the appearing list.
Fig.2.11
Note: If there is any communication problem, try to change RS485A and RS485B
wires in the converter and check the driver installation of RS 485 converter.
Note: You can find the COM port settings in the manual of your converter. Or you
can check the used COM port in Start menu / Control panel / System / Hardware / Device
manager / COM ports in Windows operation system.
