Isolated Loop Circuit Protector
when used with one or more IG1CM Modules
Model IG1C3R
UL497B 90 VDC Breakdown
SURGE PROTECTION
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081
154IG24461
Route coaxial cables through knockout located in the bottom
section of the enclosure. Connect the incoming (unprotected)
cable to the upper threaded connector on the IG1C module.
Connect the protected cable (to the equipment) to the lower
threaded connector of the module.
Repeat for each set of coaxial cables to be protected.
IN (unprotected)
OUT (protected)
OUT (protected)
IN (unprotected)
Optional
Modules
LISTED
27
TM
