Copyright
©
2015
congatec
AG
PA3Cm11
72/81
Feature
Options
Description
Device Reset Timeout
10 sec
20 sec
30 sec
40 sec
Select USB legacy mass storage device start unit command timeout.
USB Transfer Timeout
1 sec
5 sec
10 sec
20 sec
Select the timeout value for control, bulk, and interrupt transfers.
Device Power-Up
Delay Selection
Auto
Manual
Select maximum time a USB device might need before it properly reports itself to the host controller.
'Auto' – Selects a default value which is 100ms for a root port or derived from the hub descriptor for a hub port.
Device Power-Up
Delay Value
0–40
Set power-up delay value in seconds. Default: 5
8.4.29
Platform Trust Technology
Feature
Options
Description
fTPM
Disable
Enable
Enable or disable trusted platform module support.
8.4.30
Security Configuration
Feature
Options
Description
TXE
Enabled
Disabled
Enable or disable trusted execution engine.
TXE HMRFPO
Enable
Disable
Enable or disable Host ME Region Flash Protection Overwrite (HMRFPO).
TXE Firmware Update
Enabled
Disabled
Enable or disable firmware update.
TXE EOP Message
Enabled
Disabled
Enable or disable TXE End of Post (EOP) message.
TXE Unconfiguration Perform
No option
Execute a TXE unconfiguration command
Intel
®
Anti-Theft Technology
Configuration
No option
Intel
®
AT
Enable
Disable
Enable or disable Anti-Theft (AT) technology.
