
Copyright
©
2015
congatec
AG
PA3Cm11
32/81
Connector Type
X48: 1.25 mm, 40 pin Hirose connector (DF13 Series)
Possible Mating Connector: Hirose DF13-40DS-1.25C
Note
congatec offers LVDS cable for only 17" AUO Optronics G170EG01 V.1 panel (see section 1.2.3 “Optional Cables”). For more information,
contact congatec technical solution department.
Note
1. Revision A.x and earlier support LVDS on only commercial variants.
2. Revision B.x and later support LVDS on both commercial and industrial variants.
3. Industrial variants that feature LVDS must operate within the temperature range of -25°C and 85°C.
5.7.2.1
Backlight Power Connector
The conga-PA3 provides backlight power on connector X2. The connector supports 5 V or 12 V backlight power.
The backlight fuse limits the
power budget of pins 1 and 5 by 1.5 A hold current.
Table 22 Connector X2 Pinout Description
Pin
Signal Name
Description
1
+12V BKLT_PWR
12V Backlight inverter power
2
GND
Ground
3
BKLT_EN (3.3V)
Backlight enable
4
BKLT_CTRL (3.3V)
Backlight control
5
+5V BKLT_PWR
5V Backlight inverter power
Connector Type
X2: 2 mm, 5 pin, JST connector (PH Series)
Possible Mating Connector: JST PHR-5
Backlight Power - Connector X2