Copyright
©
2015
congatec
AG
PA3Cm11
30/81
5.6.2
Mini SATA (shared with mini PCIe)
The mini SATA connector X9 on the conga-PA3 is used to connect mSATA devices or mini PCIe devices. When an mSATA or mPCIe device is
connected to X9, the conga-PA3 automatically detects the type of device attached.
For pinout description, see section 5.10.2 "Mini PCIe (shared with mini SATA)".
Connector Type
X9: 0.8 mm pitch, 52 pin mini PCI socket
Note
For card type recognition, pin 43 of the mSATA card must not be connected.
5.7
Display Interfaces
The conga-PA3 supports dual simultaneous displays – one Digital Display Interface and one LVDS interface.
5.7.1
Display Port Interface DP++
The conga-PA3 SBC has one DP++ connector (X3) located at the rear I/O panel. The display port supports DP, HDMI and DVI displays.
Table 20 Connectors X3 Pinout Description.
Pin Signal
Pin
Signal
1
11
GND
2
GND
12
DDI_TX3-
3
DDI_TX0-
13
CONFIG1
4
14
CONFIG2
5
GND
15
6
DDI_TX1-
16
GND
7
17
DDI_AUX-
8
GND
18
DDI_HPD
9
DDI_TX2-
19
GND
10
20
3.3V
X9
mSATA/mPCIe Socket
(Connector X9)
DP++ Connector X3
