Ford Transit VM 430, Handbook

Page: 132 / 168

-132-
Audio system security
SECURITY CODE
Most units incorporate a unique
Keycode security number that must
be entered before the unit will operate.
Normally, the Ford Dealer does this
during the predelivery inspection.
If the battery is disconnected for any
reason, or the audio unit is removed from
the vehicle, the Keycode must be re-
entered before the unit will work again.
LOST SECURITY CODE
If you lose the Keycode, contact your
dealer and supply details of your audio
unit along with some proof of identity.
Your Dealer will then obtain the correct
code from Ford Motor Company.
ENTERING A SECURITY
CODE
If ‘CODE - - - -’, ‘CODE 0000’ or ‘Enter
Keycode’ appears in the display when
you switch on the audio unit, you must
enter the Keycode using the station
preset buttons.
Press button 1 repeatedly until the 1.
first digit of your Keycode is shown
in the display.
Press preset buttons 2, 3 and 4 in 2.
the same way for remaining three
digits.
Make sure that the complete 3.
Keycode is correct before pressing
preset button 5 to confirm it.
INCORRECT SECURITY
CODE
Up to 10 Keycode entry attempts are
allowed with various consequences if
you get it wrong.
The number of attempts is shown in the
display.
If the display reverts to ‘CODE’ •
another entry attempt may be made
immediately.
If the display shows ‘WAIT 30’, the •
unit will be locked for 30 minutes.
Wait until the timer counts down to
zero. When ‘CODE’ is displayed,
enter the Keycode again.
After 10 incorrect attempts the unit •
will be permanently inoperative and
‘‘LOCKED’ will be displayed. Contact
your local Ford Dealer for help.