Ford Transit VM 430, Handbook

Page: 134 / 168

-134-
PHONE MUTE CONTROL
Where available, press the • PHONE
button to mute your audio unit.
Press • PHONE again to unmute.
STATION TUNING CONTROL
Seek tuning
Select a waveband and briefly press one
of the arrow buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual tuning
Press the • MENU button until the
MAN display appears.
Then press one of the arrows to •
tune down or up the waveband in
small increments or press and hold
to increment quickly, until you find a
station you want to listen to.
Scan tuning
SCAN allows you to listen to 10 seconds
of each station detected.
Press the • MENU button repeatedly
until a SCAN display appears.
Use the arrow buttons to scan up •
or down the selected waveband.
‘SCAN’ appears in the display.
Depending on the audio unit, press •
the LEFT or RIGHT arrow button or
MENU
again to continue listening to
a station.
Audio unit operation
ON/OFF CONTROL
Press the on/off control. This will also
operate the unit for up to one hour with
the ignition turned off. The radio will
switch off automatically after one hour.
VOLUME CONTROL
Use this control to raise or lower the
volume of the current audio source
at any time. When you make an
adjustment, the display indicates the
selected volume level.
BASS/TREBLE CONTROL
6000CD audio units have controls to
adjust bass or treble response.
Press the • Bass/Tre button once
for bass or twice for treble.
Use the •
volume control
or on
some units the LEFT or RIGHT
arrow button.
The display indicates the level selected.
BALANCE/FADE CONTROL
The FADE control is used to adjust the
sound distribution from front to rear in
vehicles equipped with rear speakers.
The
BALANCE
control is used to adjust
the sound distribution between the left
and right speakers.
Press the button once for fade or •
twice for balance.
Use the •
volume control
or on
some units the LEFT or RIGHT
arrow button to make the necessary
adjustment.
The display indicates the level selected.