manualshive.com logo in svg

Ford 2015 EXPEDITION, Owner'S Manual

The Ford 2015 EXPEDITION Quick Reference Manual is a comprehensive guide for all owners of this powerful SUV. With just a click of a button, this manual is available for download absolutely free from manualshive.com. It provides essential information and quick assistance for a seamless driving experience.

Share
Download
background image

If the liftgate reverses and starts to close after an open request, a fast
continuous tone indicates excessive load on the gate or a possible strut
failure. Have the system checked by an authorized dealer if you still have
a fast tone after removing the load.

To open or close from the instrument panel:

Press the

instrument panel liftgate button.

To open or close with the remote control:

Press the remote

control liftgate-decklid button twice within three seconds.

To open with the liftgate control
button in the liftgate handle:

1. Unlock the liftgate with the

remote control or power door
unlock button.

2. Press the control button

A

located on the inside of the
liftgate pull handle.

Note:

Allow the power system to

open the liftgate after pressing the
control. Manually pushing or pulling

the liftgate may activate the system’s obstacle detection feature and
stops the power operation.

To close with the cargo area
liftgate control button:

Press and

release the cargo area liftgate
control button located on the left
rear cargo area trim panel.

WARNING:

Keep clear of the liftgate when activating the rear

switch.

E187797

Locks

75

2015 Expedition

(exd)

Owners Guide gf, 1st Printing, July 2014
USA

(fus)

Summary of Contents for 2015 EXPEDITION





















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 EXPEDITION

Jeep Wrangler2018 Owner'S Manual preview
Wrangler2018
Brand: Jeep Pages: 608
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
Thule 1430 Kit Instructions Manual preview
1430 Kit
Brand: Thule Pages: 8
Westin 22-1065 Instructions preview
22-1065
Brand: Westin Pages: 3
Renault KANGOO BE BOP Driver'S Handbook Manual preview
KANGOO BE BOP
Brand: Renault Pages: 198
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Autoplugin RCP-B1 Installation Manual preview
RCP-B1
Brand: Autoplugin Pages: 8
Mazda Auto-Dimming Mirror User Manual preview
Auto-Dimming Mirror
Brand: Mazda Pages: 2
PERODUA Aruz 2019 Quick User Manual preview
Aruz 2019
Brand: PERODUA Pages: 43
INNO TR163 Installation Instructions preview
TR163
Brand: INNO Pages: 3
Westin 40-1245 Installation Instructions preview
40-1245
Brand: Westin Pages: 2

Brands by name

Popular brands

Load more brands