Ford 2015 EXPEDITION Page 131 Owner'S Manual Download

Page: 131 / 564

MyKey® Messages

Action / Description

MyKey active Drive Safely

Displays when MyKey is active.

Speed Limited to xx MPH/km/h

Displays when starting the vehicle
and MyKey is in use and the MyKey
speed limit is on.

Near Vehicle Top Speed

Displays when a MyKey is in use and
the MyKey speed limit is on and the
vehicle speed is approaching 80 mph
(130 km/h).

Check Speed Drive Safely

Displayed when a MyKey is in use
and the optional setting is on and
the vehicle exceeds a preselected
speed.

Buckle Up to Unmute Audio

Displays when a MyKey is in use and
Belt-Minder® is activated.

Could Not Program Integrated Key

Displays when an attempt is made to
program a spare key using two
existing MyKeys.

Vehicle at Top Speed of MyKey
Setting

You have reached the speed limit set
for your MyKey.

AdvanceTrac On MyKey Setting

With a MyKey in use, AdvanceTrac
turns on.

Traction Control On MyKey Setting

With a MyKey in use, traction
control turns on.

MyKey Park Aid Cannot be
Deactivated

With a MyKey in use, park aid is
always on.

Off Road Messages

Action / Description

For Off Road Slow to 5MPH

Displays when your vehicle speed
requirement for off-raod mode entry
has not been met.

Enter Off Road Mode Enabled

Displays when off-road mode
becomes active.

Exiting Off Road Mode

Displays when off-road mode
becomes inactive.

Hill Descent Control Off

Displayed when hill descent control
mode is deactivated.

130

Information Displays

2015 Expedition

(exd)

Owners Guide gf, 1st Printing, July 2014
USA

(fus)

Summary of Contents for 2015 EXPEDITION





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 EXPEDITION

Reviews:

Related manuals for 2015 EXPEDITION

Brands by name

Popular brands

Ford 2015 EXPEDITION, Owner'S Manual

Search results

Summary of Contents for 2015 EXPEDITION

Reviews:

Related manuals for 2015 EXPEDITION

Brands by name

Popular brands