manualshive.com logo in svg

Ford 2015 EXPEDITION, Owner'S Manual

The Ford 2015 EXPEDITION Quick Reference Manual is a comprehensive guide for all owners of this powerful SUV. With just a click of a button, this manual is available for download absolutely free from manualshive.com. It provides essential information and quick assistance for a seamless driving experience.

Share
Download
background image

Replacing License Plate Lamp Bulbs

The license plate bulbs are located above the license plate on the
liftgate. To change the license plate bulbs:

1. Make sure the headlamp switch is
in the off position.

2. Remove the license lamp screw
from the assembly.

3. Pull the lamp down and twist the
bulb socket counterclockwise. Remove
the bulb socket from the lamp.

4. Pull out the old bulb and push in
the new bulb.

5. Install the bulb socket in the lamp assembly by turning it clockwise.

6. Install the lamp assembly and secure it with the retaining screw.

Replacing the High-Mount Brake Lamp Bulbs

To change the high-mount brake
lamp bulbs:

1. Remove the two screws holding
the lamp assembly in place.

2. Pull the lamp assembly straight
out.

3. Disconnect the wire harness.

4. Press the four tabs that hold the
light assembly on, one at a time,
and pull the black bulb carrier away
from the lamp.

5. Pull the old bulb out and replace
with the new bulb.

6. Snap the black bulb carrier into
the lamp assembly.

7. Connect the wire harness.

8. Install the lamp assembly with two screws.

Replacing Approach Lamp/Mirror Turn Signal Bulbs (If Equipped)

For bulb replacement, see your authorized dealer.

Maintenance

311

2015 Expedition

(exd)

Owners Guide gf, 1st Printing, July 2014
USA

(fus)

Summary of Contents for 2015 EXPEDITION





















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 EXPEDITION

Jeep Commander Overview Manual preview
Commander
Brand: Jeep Pages: 25
Jeep Commander Warranty Information Booklet preview
Commander
Brand: Jeep Pages: 51
Farenheit CCD-5XS Owner'S Manual preview
CCD-5XS
Brand: Farenheit Pages: 8
OCTO SmartDiag2GO GD201-O User Manual preview
SmartDiag2GO GD201-O
Brand: OCTO Pages: 5
Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Brand: Toyota Pages: 35
Toyota YARIS LIFTBACK 2009 Quick Reference Manual preview
YARIS LIFTBACK 2009
Brand: Toyota Pages: 13
Westfalia 316 145 Manual preview
316 145
Brand: Westfalia Pages: 71
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
Maserati Quattroporte Automatic Owner'S Manual preview
Quattroporte Automatic
Brand: Maserati Pages: 272
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
Radical Sportscars SR 3 SL Owner'S Handbook Manual preview
SR 3 SL
Brand: Radical Sportscars Pages: 44
Cadillac 2011 SRX CROSSOVER Owner'S Manual preview
2011 SRX CROSSOVER
Brand: Cadillac Pages: 416
TIE DOWN LONGRUN 86103 Assembly/Installation Instructions preview
LONGRUN 86103
Brand: TIE DOWN Pages: 2
Discount Car Stereo A2DIY-MBR Quick Start Bluetooth Installation Manual preview
A2DIY-MBR
Brand: Discount Car Stereo Pages: 8
CITROËN Jumpy Miltispace Owner'S Handbook Manual preview
Jumpy Miltispace
Brand: CITROËN Pages: 164
Directed MIT4 Firmware Specific Manual preview
MIT4
Brand: Directed Pages: 30

Brands by name

Popular brands

Load more brands